West Plus series controllers
Plus series controllers
West Plus series controllers (plc, controllori e i/o) ha una mappa Modbus di 54 registri. Function code usati: 1 (coil), 3 (holding register). Tipi di dato: boolean, int16, uint16. Esempi: Process variable all'indirizzo 1 (FC 3, int16); Comms write enabled all'indirizzo 1 (FC 1, boolean); Target setpoint all'indirizzo 2 (FC 3, int16); Manual control all'indirizzo 2 (FC 1, boolean).
PLC, controllori e I/ODa documento
Mappa registri Modbus
10 registri
- FC
- 3
- Tipo
- int16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R
- FC
- 1
- Tipo
- boolean
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R
- FC
- 3
- Tipo
- int16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R/W
- FC
- 1
- Tipo
- boolean
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R/W
- FC
- 3
- Tipo
- int16
- Unità
- %
- Scala
- 1
- Len
- 1
- Accesso
- R/W
- FC
- 1
- Tipo
- boolean
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R/W
- FC
- 3
- Tipo
- int16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R
- FC
- 1
- Tipo
- boolean
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R/W
- FC
- 3
- Tipo
- uint16
- Unità
- %
- Scala
- 0.1
- Len
- 1
- Accesso
- R/W
- FC
- 1
- Tipo
- boolean
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R
| Len | Scala | Endian | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Process variable Current PV. Raw 62976 is under range, 63232 over range and 63488 sensor break (read as int16: -2560, -2304, -2048) | process_variable | 3 | int16 | 1 | 1 | — | R | big | |
| 1 | Comms write enabled 1 = writes enabled, 0 = disabled (writes then get exception 3) | comms_write_enabled | 1 | boolean | 1 | 1 | — | R | big | |
| 2 | Target setpoint Selected setpoint. Read-only when the target is the remote setpoint | target_setpoint | 3 | int16 | 1 | 1 | — | R/W | big | |
| 2 | Manual control 1 = manual control, 0 = automatic control | manual_control | 1 | boolean | 1 | 1 | — | R/W | big | |
| 3 | Output power 0 to 100 % (single output) or -100 to +100 % (dual output). Writable only in manual control | output_power | 3 | int16 | 1 | 1 | % | R/W | big | |
| 3 | Auto-tune 1 = on, 0 = off | auto_tune | 1 | boolean | 1 | 1 | — | R/W | big | |
| 4 | Deviation PV minus setpoint | deviation | 3 | int16 | 1 | 1 | — | R | big | |
| 4 | Pre-tune 1 = on, 0 = off | pre_tune | 1 | boolean | 1 | 1 | — | R/W | big | |
| 5 | Secondary proportional band 0.0 to 999.9 % of the input span. Read-only during auto-tune | secondary_proportional_band | 3 | uint16 | 1 | 0.1 | % | R/W | big | |
| 5 | Alarm 1 active 1 = active | alarm_1_active | 1 | boolean | 1 | 1 | — | R | big |
Stai vedendo 10 registri su 54.
La mappa completa è riservata agli utenti registrati. La registrazione è gratuita.