Danfoss VLT AQUA Drive FC 202
VLT AQUA Drive FC 202
Danfoss VLT AQUA Drive FC 202 (altro) ha una mappa Modbus di 42 registri. Function code usati: 1 (coil), 3 (holding register). Tipi di dato: boolean, int16, uint16. Esempi: Last error code all'indirizzo 7 (FC 3, uint16); Parameter index all'indirizzo 9 (FC 3, uint16); Parameter write control all'indirizzo 65 (FC 1, boolean); 3-12 Catch up/slow-down value all'indirizzo 3120 (FC 3, uint16, %).
AltroDa documento
Mappa registri Modbus
10 registri
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R/W
- FC
- 1
- Tipo
- boolean
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R/W
- FC
- 3
- Tipo
- uint16
- Unità
- %
- Scala
- 0.01
- Len
- 1
- Accesso
- R/W
- FC
- 3
- Tipo
- uint16
- Unità
- Hz
- Scala
- 0.1
- Len
- 1
- Accesso
- R/W
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R/W
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R/W
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R/W
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R/W
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R/W
| Len | Scala | Endian | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 7 | Last error code Last error code from an FC data object interface | last_error_code | 3 | uint16 | 1 | 1 | — | R | big | |
| 9 | Parameter index Index used for the next access to an array parameter; set it before reading or writing one | parameter_index | 3 | uint16 | 1 | 1 | — | R/W | big | |
| 65 | Parameter write control 0 = parameter changes go to RAM only, 1 = to RAM and EEPROM | parameter_write_control | 1 | boolean | 1 | 1 | — | R/W | big | |
| 3120 | 3-12 Catch up/slow-down value Parameter 3-12; the manual's example: 1352 is 12.52 % | 3_12_catch_up_slow_down_value | 3 | uint16 | 1 | 0.01 | % | R/W | big | |
| 4140 | 4-14 Motor speed high limit [Hz] Parameter 4-14; the manual's write example sends 1000 for 100 Hz | 4_14_motor_speed_high_limit_hz | 3 | uint16 | 1 | 0.1 | Hz | R/W | big | |
| 8300 | 8-30 Protocol Set to Modbus RTU to use this map | 8_30_protocol | 3 | uint16 | 1 | 1 | — | R/W | big | |
| 8310 | 8-31 Address | 8_31_address | 3 | uint16 | 1 | 1 | — | R/W | big | |
| 8320 | 8-32 Baud rate 2400 to 115200 baud, coded as in the programming guide | 8_32_baud_rate | 3 | uint16 | 1 | 1 | — | R/W | big | |
| 8330 | 8-33 Parity / stop bits Default: even parity, 1 stop bit; coded as in the programming guide | 8_33_parity_stop_bits | 3 | uint16 | 1 | 1 | — | R/W | big | |
| 50000 | Control word FC profile control word (8-10 Control Profile = FC profile) | control_word | 3 | uint16 | 1 | 1 | — | R/W | big |
Stai vedendo 10 registri su 42.
La mappa completa è riservata agli utenti registrati. La registrazione è gratuita.