Belimo Belimo -MOD actuators
Belimo -MOD actuators
Belimo Belimo -MOD actuators (plc, controllori e i/o) ha una mappa Modbus di 22 registri. Function code usati: 3 (holding register). Tipi di dato: bitfield, uint16. Esempi: Setpoint all'indirizzo 0 (FC 3, uint16, %); Override control all'indirizzo 1 (FC 3, uint16); Command all'indirizzo 2 (FC 3, uint16); Actuator type all'indirizzo 3 (FC 3, uint16).
PLC, controllori e I/ODa documento
Mappa registri Modbus
10 registri
- FC
- 3
- Tipo
- uint16
- Unità
- %
- Scala
- 0.01
- Len
- 1
- Accesso
- R/W
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R/W
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R/W
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R
- FC
- 3
- Tipo
- uint16
- Unità
- %
- Scala
- 0.01
- Len
- 1
- Accesso
- R
- FC
- 3
- Tipo
- uint16
- Unità
- ° / mm
- Scala
- 1
- Len
- 1
- Accesso
- R
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R
- FC
- 3
- Tipo
- uint16
- Unità
- %
- Scala
- 0.01
- Len
- 1
- Accesso
- R
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R
| Len | Scala | Endian | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 0 | Setpoint Position setpoint 0-100 %, scaled between Min (No. 106) and Max (No. 107). | setpoint | 3 | uint16 | 1 | 0.01 | % | R/W | — | |
| 1 | Override control Forces a fixed position instead of the setpoint. | override_control | 3 | uint16 | 1 | 1 | — | R/W | — | |
| 2 | Command Starts a service function; reads back 0 once accepted. 4 clears No. 105. | command | 3 | uint16 | 1 | 1 | — | R/W | — | |
| 3 | Actuator type | actuator_type | 3 | uint16 | 1 | 1 | — | R | — | |
| 4 | Relative position | relative_position | 3 | uint16 | 1 | 0.01 | % | R | — | |
| 5 | Absolute position Degrees for rotary actuators, mm for linear actuators. | absolute_position | 3 | uint16 | 1 | 1 | ° / mm | R | — | |
| 8 | Sensor 1 value Raw reading of sensor input 1; meaning and scale follow No. 108 (see notes). | sensor_1_value | 3 | uint16 | 1 | 1 | — | R | — | |
| 12 | Analog setpoint Setpoint seen on the 0-10 V input when Setpoint source = Analog. | analog_setpoint | 3 | uint16 | 1 | 0.01 | % | R | — | |
| 99 | Bus termination Shows whether the built-in 120 ohm terminator is on (set with the tool). | bus_termination | 3 | uint16 | 1 | 1 | — | R | — | |
| 100 | Series number 1st part First block of the serial number on the housing label. | series_number_1st_part | 3 | uint16 | 1 | 1 | — | R | — |
Stai vedendo 10 registri su 22.
La mappa completa è riservata agli utenti registrati. La registrazione è gratuita.